Galvanised Angle Bar
Angle Bar 2X2X1 4 Price
Galvanised Angle Bar
Galvanized Iron Angle Bar
Hot Dipped Galvanized Angle

Galvanized Lub kaum ntse ntse Bar

Galvanised Angle Bar is a kind of steel bar that has a L-shaped cross section with two legs, either equal or unequal. Angle Bar, also known as angle iron, is widely used in various industries, such as construction, engineering, machinery, manufacturing, and more. Galvanised Angle Bar is made of low carbon steel or high strength low alloy steel, such as Q235B, Q355B, A36, SS400, S355JR, S355J0, etc.

Xa kev nug

Khoom Taw qhia

It is cost-effective and durable, compared to other types of steel bars.


Q235B	GB/T 700	C: {{0}}.12-0.20, Mn: 0.30-0.70, Si: Less than or equal to 0.30, P: Less than or equal to 0.045, S: Less than or equal to 0.045	Yield Strength: 235 MPa min, Tensile Strength: 370-500 MPa, Elongation: 26% min	45-75 microns
Q355B	GB/T 1591	C: Less than or equal to {{0}}.20, Mn: 1.00-1.60, Si: Less than or equal to 0.55, P: Less than or equal to 0.040, S: Less than or equal to 0.040, Nb: Less than or equal to 0.05, V: Less than or equal to 0.15, Ti: Less than or equal to 0.20	Yield Strength: 355 MPa min, Tensile Strength: 450-630 MPa, Elongation: 21% min	45-75 microns
A36	ASTM A36	C: {{0}}.26 max, Mn: 1.35 max, P: 0.04 max, S: 0.05 max	Yield Strength: 250 MPa min, Tensile Strength: 400-550 MPa, Elongation: 20% min	45-75 microns
SS400	JIS G3101	C: {{0}}.30 max, Mn: 1.60 max, P: 0.05 max, S: 0.05 max	Yield Strength: 245 MPa min, Tensile Strength: 400-510 MPa, Elongation: 17% min	45-75 microns
S355JR	EN 10025-2	C: {{0}}.24 max, Mn: 1.60 max, P: 0.035 max, S: 0.035 max	Yield Strength: 355 MPa min, Tensile Strength: 470-630 MPa, Elongation: 22% min	55-80 microns
S355J0	EN 10025-2	C: {{0}}.20 max, Mn: 1.60 max, P: 0.030 max, S: 0.030 max	Yield Strength: 355 MPa min, Tensile Strength: 470-630 MPa, Elongation: 22% min	55-80 microns

Cim npe nrov:

Tug

Equal Angle Bar

Tom ntej

Lub kaum sab xis Bar

Koj Tseem Yuav Zoo Li

Xa kev nug